30L Advanced Glass Pilot Reactor Horizontal Condenser
Graduated feeding Flask Include to Valve on top with 25 GL threaded Cap in Center with bottom Valve with GL18 threaded with Flask Clamping to Frame, Connecting piping to dip pipe and lid by PTFE Tubing.
Reaction vessel Graduated with glass lid transparent glass for visual check during reaction , jacketed vessel easy to connect the temperature control unit , large lid allows the presence of multiple nozzle.
Agitator available in various MOC like SS304/SS316/ Hastelloy / with PTFE Sleeve in Propeller, Impeller, Anchor blade for Homogeneous liquid agitation. It can work continues without any damage long lasting system without breakage due to turbulences for high viscous liquids agitation.
Zero Holdup Valve for complete remover the material inside the reactor. Special design valve with sensor allow to minimum temperature sensing. Electrical Motor, Air motor, Lab Motor OHS, Vapor line with reflux head Included horizontal coil condenser with hose connector vent valve for fume and connector for Condenser inlet and outlet for cooling.
Graduated Colleting Flask with tow valve GL 18 threaded Connection Center nozzle connecting with Reflux head via PTFE Tubing, Including discharge valve with flask clamping to Frame.
Control Panel with Stainless Steel Frame with RPM speed controller included two-point temperature display with PT100 temperature probe.
Compact stainless steel structure frame allow to installation vessel easily with spill tray. Included moveable wheel design according to vessel size.
Ordering Details
| No. | Base Code | DESCRIPTION |
|---|---|---|
| AEUD0L030300 | 30 LTR JACKETED UNIT (LAB + HYBRID) | |
| AEUD0E030300 | 30 LTR JACKETED UNIT (ELECTRICAL MOTOR + HYBRID) | |
| AEUD0N030300 | 30 LTR JACKETED UNIT (PNEUMATIC MOTOR + HYBRID) | |
| 1 | AEBD0R030300 | 30 LTRS. JACKETED VESSEL (GRADUATED) |
| AEAV1R050040 | ZERO HOLD GLASS/PTFE FLUSH VALVE DN50/40 WITH SENSOR | |
| 2 | AEAV0R050040 | ZERO HOLD GLASS/PTFE FLUSH VALVE DN50/40 |
| 3 | AEBL0R007300 | DN300 VESSEL COVER WITH 7 NOZZLES: |
| AEBL1R007300 | DN300 VESSEL COVER WITH 7 NOZZLES (B45): | |
| A | N1 | – DN50/B45 FOR AGITATOR & MOTOR |
| B | N2 | – DN80 WITH QUICK RELEASE FIXTURE FOR SOLID CHARGING |
| C | N3 | – DN25 FOR TEMPERATURE SENSOR (PT100) |
| D | N4 | – DN80 FOR VAPOUR LINE |
| E | N5 | – DN25 SPARE PORT |
| F | N6 | – DN25 FOR DIP PIPE |
| G | N7 | – DN40 FOR PRESSURE SAFTY VALVE |
| 4 | AEBB0O080080 | PIPE BEND DN80 |
| 5 | AEBR0O080000 | DN80 REFLUX SEPARATOR |
| 6 | AETS0R000000 | TEMPERATURE SENSOR – PT100, |
| 7 | AETS0B080000 | DN80 LINE SHOCK ABSORBER |
| 8 | AETS0B025000 | DN25 LINE SHOCK ABSORBER |
| 9 | AEBV0AC10150 | GRADUATED VESSEL – 10 LTRS. |
| 10 | AEBC0C050080 | 80° SLANTED COIL CONDENSER – 0.5 m² |
| 11 | AEMP0S040000 | PRESSURE SAFETY VALVE DN40 |
| 12 | AEMX0S000000 | OVERHEAD STIRRER WITH HIGH TORQUE | X |
| A | X → E | ELECTRICAL |
| B | X → N | PNEUMATIC |
| C | X → L | HIGH SPEED LAB STIRRER DRIVE |
| D | X → M | HIGH SPEED MAGNETIC STIRRER DRIVE |
| 13 | AETX0S030000 | AGITATOR SHAFT FOR 30 LTRS. | X |
| A | X → A | ANCHOR |
| B | X → P | PROPELLER |
| C | X → I | IMPELLER |
| D | X → H | HYBRID (ANCHOR + PROPELLER) |
| 14 | AEMS0S030000 | STAINLESS STEEL SCAFFOLD FOR 30 LTRS. ASSEMBLY |
| 15 | AETT0D007000 | FLEXIBLE PTFE TUBE |
| 16 | AERN0H000000 | BOLA HOSE CONNECTOR |
| 17 | AEOX0S000000 | SEALING ARRANGEMENT | X |
| A | X → S | DRY MECHANICAL SEAL |
| B | X → D | DOUBLE MECHANICAL SEAL |
| C | X → C | COWIE SEAL |
| D | X → M | MAGNETIC SEAL |
The flush bottom valve with “Zero Dead Space” is designed to keep solids out of the vessel’s bottom , does not block and easy to clean. in case of breakage, it can be replaced without any tool , quick to change the valve. Our valve permits total drainage of the vessel contents.
Looking for Best Manufacturer of Glass Pilot Plants & Turnkey Projects?