Glass Components, Glass Pilot Plant, Process Systems, Process Instrumentation, Glass Safety valve, Over GLR Assembly, Glass Nutche Filter, Triple Wall Glass Jacketed Reactor, Glass Safety valve, Pressure Relief Valve, Automated Batch Reactor, PTFE lined Product+91 9377552542

Digital Temperature Indicator
This instrument is mainly used to monitor the temperature of liquid in a glass vessel in a typical glass distillation unit.

This instrument consists of a Temperature indicator and a Resistance Temperature Detector (RTD). The instrument works on 230V, 50Hz power supply. This displays the temperature in degree Centigrade in three and half digits of 12.5mm character height..

Vessel
Cap. Ltr
RTD Length Cat. Ref.
20 400 ADTI20
50 500 ADTI50
100 70%0 ADTI100
200 700 ADTI200
Digital Temperature Indicator

Two Point Digital Temperature Indicator
This instrument is mainly used to monitor the temperature of liquid in a glass vessel and temperature of vapours at reflux divider in a typical glass distillation unit.This instrument consists of a Temperature indicator and two Resistance temperature detectors (RTDS). The instrument works on 230V,50Hz power supply.in a typical glass distillation unit. This instrument consists of a Temperature indicator and a Resistance Temperature Detector (RTD). The instrument works on 230V, 50Hz power supply. This displays the temperature in degree Centigrade in three and half digits of 12.5mm character height.

 

Vessel
Cap. Ltr
RTD Length
for vessel
RTD Length
for reflux divider
Cat. Ref.
20 400 200 ADTT20
50 500 225 ADTT50
100 70%0 250 ADTT100
200 700 300 ADTT200
Two Point Digital Temperature Indicator

Continuous Temperature Indicator
This instrument displays and controls the temperature continously by switching the power supply ON and OFF in an electrical heating equipment as per the initial settings of heating temperature, band width and reset temperature. The instrument consists of a Temperature controller,a series magnetic controller and a Resistance Temperature Detector (RTD).

 

RTD is put into the Thermometer Pocket of the glass vessel and desired settings are done.As the temperature in the vessel reaches to the set heating temperature,the temperature controller cuts the power in heating the equipment.Power starts on again as the temperature goes down as per the settings of band width and reset temperature.

Vessel
Cap. Ltr
RTD Length Cat. Ref.
20 400 ACTC20
50 500 ACTC50
100 70%0 ACTC100
200 700 ACTC200
Continuous Temperature Indicator

Decantor (Separator)
Decantation is a process of separation of two immiscible liquids, having different densities.When these liquids are allowed to settle,two distinct layers are formed, heavier at bottom and lighter at top. This is a decantor which is suitable for continuous decantation. The mixture of liquids is continuosly feed in the decantor at low velocity. This allows sufficient residence time for the formation of separate layers. The light phase liquid enters the dip pipe at lower and overflow in the discharge pipe and is removed from the bottom.

 

This decantor provides continuous separation, visul monitoring, and ensures separation even after feeding is stopped.Decantor can be provided with adjustable overflow valve,(Type B) to adjust the position of interface for different operating situations.

Nom.
Cap.
DN DN1 DN2 DN3 DN4 DN5 DN6 DN7 L L1 L2 L3 L4 Type Cat. Ref.
20L 80 25 50 25 25 25 25 50 800 125 525 150 - A ASPS20
50L 100 40 50 25 25 40 40 50 1025 150 725 150 - A ASPS50
100L 150 40 50 25 25 40 40 50 1175 200 825 150 - A ASPS100
200L 225 40 50 25 25 40 40 50 1475 250 1075 150 - A ASPS200
 
20L 80 25 50 25 25 25 25 50 800 125 525 150 - A ASPA20
50L 100 40 50 25 25 40 40 50 1025 150 725 150 - A ASPA50
100L 150 40 50 25 25 40 40 50 1175 200 825 150 - A ASPA100
200L 225 40 50 25 25 40 40 50 1475 250 1075 150 - A ASPA200
decantor (separator)

Decantor can be constructed with horizontal cylindrical vessels and to provide larger separating surface (Mention catalogue ref. is AHPA & AHPS)

 

Measurment and Control

Control and Measurment