Glass Components, Glass Pilot Plant, Process Systems, Process Instrumentation, Glass Safety valve, Over GLR Assembly, Glass Nutche Filter, Triple Wall Glass Jacketed Reactor, Glass Safety valve, Pressure Relief Valve, Automated Batch Reactor, PTFE lined Product+91 9377552542

PACKING REQUIRE FOR VARIOUS COLUMN SECTION(KGS.)
If the free cross-sections obtained with the combination of column sections and packing supports are not large enough, then an alternative is to use type APS pipe sections in combination with fixed support plates.
Each item comprises the glass supports plate,screwed rod with nuts, flat washers and compression springs and the special backing flange required for the assembly.

COLUMN
SECTION -SIZE
Vol LITER
AFC
8

AFC
12

AFC
15

AFC
20

AFC
30

AFC
40

AFC
50
ACS 3/1000 4.0 2.6 2.2 3.3 2.0 1.8 1.2 1.1
ACS 4/1000 7.6 4.6 3.8 5.7 3.4 3.0 2.1 1.9
ACS 6/1000 15.5 9.3 7.8 11.6 7.0 6.2 4.2 3.9
ACS 9/1000 31.8 19.1 15.9 23.9 14.3 12.7 8.6 8.0
ACS 12/1000 61.9 37.1 31.0 46.4 27.9 24.8 16.7 15.5
ACS 16/1000 110 66.0 55.0 82.5 49.5 44.0 29.7 27.5
ACS 18/1000 145 87.0 72.5 108.8 65.3 58.0 39.2 36.3
ACS 24/1000 255 153.0 127.5 191.3 114.8 102.0 68.9 63.8
                 


Notes of use of column packing:
1. Due to their low bulk densities,glass rasching rings are particularly suitable for packing glass columns.
2. Generally theratio of column diameter to packing diameter sholuld not beless than 8:1.
3. When using smaller packing size,a small layer of larger packing sholud be used on packing support,to prevent the smaller packing falling through.
4. In vacuum application and applications involving high vapour velocities,packing may be lifted and may damage other parts. To prevent this, a packing retainer (PTFE Performance Plates) should be used above the packed section.

Packing Require for Various Column Section